修复你的物品 社区 商店

Xelio P900A-BK Screen Replacement

简介

Teaching you how to replace a crack screen.

你所需要的

  1. Xelio P900A-BK Screen Replacement, Screen: 步骤 1 中的图像 1，1

    • Remove the two bottom screws.

    • The two bottom screws have a 2.44mm wide tops and are 5.44mm.

    编辑

  2. Xelio P900A-BK Screen Replacement: 步骤 2 中的图像 1，2 Xelio P900A-BK Screen Replacement: 步骤 2 中的图像 2，2

    • Slide the spludger between the screen's rolled edge and the back of the tablet and pry apart carefully. Expect the tablet screen to make a cracking sound.

    • Slide the spudger in the slit all the way around the perimeter of the tablet to fully separate the screen.

    编辑

  3. Xelio P900A-BK Screen Replacement: 步骤 3 中的图像 1，1

    • Once the screen has fully separated from the back of the tablet, gently lift up the edges to remove the screen.

    编辑

  4. Xelio P900A-BK Screen Replacement: 步骤 4 中的图像 1，2 Xelio P900A-BK Screen Replacement: 步骤 4 中的图像 2，2

    • Next, disconnect the front facing camera ribbon (shown). The ribbon is held to the motherboard by a small bar.

    • Using the spudger to pry open the bar, pull the ribbon out to disconnect it.

    编辑

  6. Xelio P900A-BK Screen Replacement: 步骤 5 中的图像 1，2 Xelio P900A-BK Screen Replacement: 步骤 5 中的图像 2，2

    • Next, work on disconnecting the ribbon for the touch screen.

    • The touch screen ribbon is larger than the camera ribbon and is located on the left side of motherboard.

    • Using the spudger, gently pry the ribbon out from under the bar. Pull the ribbon and disconnect it from the motherboard.

    编辑

  7. Xelio P900A-BK Screen Replacement: 步骤 6 中的图像 1，3 Xelio P900A-BK Screen Replacement: 步骤 6 中的图像 2，3 Xelio P900A-BK Screen Replacement: 步骤 6 中的图像 3，3

    • Next, work to disconnect the LCD screen ribbon.

    • This ribbon is located on the right side of the motherboard.

    • The ribbon is connected to the motherboard by a small bar. Using the spudger, pry the bar apart and slide the ribbon out.

    编辑

  8. Xelio P900A-BK Screen Replacement: 步骤 7 中的图像 1，3 Xelio P900A-BK Screen Replacement: 步骤 7 中的图像 2，3 Xelio P900A-BK Screen Replacement: 步骤 7 中的图像 3，3

    • Remove the two motherboard screws.

    • To remove the first screw, expose the black strip. Then using a Philips head screwdriver, remove the first screw.

    • Locate the second screw by looking to the bottom right of the motherboard. Remove the second screw with the Philips head screwdriver.

    编辑

  9. Xelio P900A-BK Screen Replacement: 步骤 8 中的图像 1，2 Xelio P900A-BK Screen Replacement: 步骤 8 中的图像 2，2

    • Locate the last connection to the LCD in the top right section of the tablet.

    • The last connection is a ribbon connected to green wire, which is held down by tape.

    • Disconnect the ribbon by removing the tape connecting it to the plastic frame of the tablet.

    编辑

  10. Xelio P900A-BK Screen Replacement: 步骤 9 中的图像 1，1

    • With the spudger, pry the LCD screen from the plastic screen holder.

    • Use gentle, but firm force to pry the LCD away from the holder.

    编辑

  11. Xelio P900A-BK Screen Replacement: 步骤 10 中的图像 1，1

    • Work the spudger all the way around until the LCD is free from the screen holder.

    编辑

  12. Xelio P900A-BK Screen Replacement: 步骤 11 中的图像 1，1

    • Finally, lift the LCD off, removing it from the screen holder and the motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Marcus Nelson

于03/26/15注册

307 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

UMass Dartmouth, Team 7-6, Cichon Spring 2015 UMass Dartmouth, Team 7-6, Cichon Spring 2015 的会员

UMASSD-CICHON-S15S7G6

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 371