Xelio P1001A-BK Speakers Replacement

简介

Replacing the speakers is a fairly simple task. It only requires basic soldering techniques, and both speakers and speaker connection points are easily accessible. Be sure to handle the speakers gently as their wires are very thin and could easily be broken.

你所需要的

步骤 1 Back Cover

Xelio P1001A-BK Speakers Replacement, Back Cover: 步骤 1 中的图像 1，2

Xelio P1001A-BK Speakers Replacement, Back Cover: 步骤 1 中的图像 2，2

Remove the two 3 mm retaining screws from the side of the tablet with a Phillips #0 screwdriver.

编辑

步骤 2

Insert the plastic opening tool in between the shelf halves and lift the top shelf half to detach the securing tabs.
There are four securing tabs located on each long side.
Before fully separating the shell halves, observe if the speakers are separated from the shell half. If they are still in their sockets, gently pry them loose with the plastic opening tool.

编辑

步骤 3 Speakers

Xelio P1001A-BK Speakers Replacement, Speakers: 步骤 3 中的图像 1，2

Xelio P1001A-BK Speakers Replacement, Speakers: 步骤 3 中的图像 2，2

Desolder the two speaker wires with the soldering iron by melting the solder so the wires can be removed.
Remove the wires from the soldering points once they have loosened.
Use a soldering vacuum to remove the excess solder from the board.

编辑

步骤 4

Inspect your wires. You should see 2 mm of exposed wire before you move to the next step.
If necessary, use your wire-stripping tool to strip 2 mm of insulation from each wire.

编辑