跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide will teach you how to remove the front cover plate from your Xbox One wireless controller. Initially, no screws will be visible. Follow the steps to locate each factory screw.

  1. Slide the battery cover toward the top of the controller to remove it. Lift up  the batteries or the battery pack from the battery compartment.
    • Slide the battery cover toward the top of the controller to remove it.

    • Lift up the batteries or the battery pack from the battery compartment.

  2. Insert a plastic opening tool into the top seam, and  gently work the opening tool to the bottom of the controller. Continue using the opening tool to gently pry the side plate off of the controller.
    • Insert a plastic opening tool into the top seam, and gently work the opening tool to the bottom of the controller.

    • Continue using the opening tool to gently pry the side plate off of the controller.

    • Repeat this process for the second side plate.

  3. 任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits

    任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits
  4. Gently peel the battery label  or punch a hole in the center of the sticker in the battery compartment to reveal the hidden screw.
    • Gently peel the battery label or punch a hole in the center of the sticker in the battery compartment to reveal the hidden screw.

    • Remove the five 9mm torx-9 security screws from the back of the controller.

  5. Orient the controller so the front plate is facing up. Lift the front cover off of the controller.
    • Orient the controller so the front plate is facing up.

    • Lift the front cover off of the controller.

  6. Turn the controller face down and gently lift the rear plate.
    • Turn the controller face down and gently lift the rear plate.

结论

To reassemble your device, follow these instructions in reverse order.

19等其他人完成本指南。

Weston Gilmore

于2017年09月25日注册

795 信誉积分

撰写一个指南

团队

Cal Poly, Team S18-G3, Forte Fall 2017 Cal Poly, Team S18-G3, Forte Fall 2017 的会员

CPSU-FORTE-F17S18G3

4 名成员

创作了7篇指南

i used a t8 and it worked

Rudy Bp - 回复

T9 is VERY snug. T8 would probably be better but I don’t have one to try.

Craig Ferguson - 回复

添加评论

浏览统计数据:

过去的24小时: 9

过去的7天: 67

过去的30天: 289

总计 5,907