修复你的物品 加入社区 商店

Xbox 360 Wireless Controller Rear Case Replacement

简介

Stop holding your Xbox 360 wireless controller together with duct tape. Use this guide to replace your old broken rear case.

你所需要的

  1. Xbox 360 Wireless Controller Rear Case Replacement, Battery: 步骤 1 中的图像 1，2 Xbox 360 Wireless Controller Rear Case Replacement, Battery: 步骤 1 中的图像 2，2

    • Depress the battery release button on the top of the controller.

    • Remove the battery holder from the controller.

    • The standard option for Xbox 360 Wireless Controllers Battery Packs is AA batteries. A rechargeable battery is also available, but both battery options are removed from the controller in the same way.

    编辑

  2. Xbox 360 Wireless Controller Rear Case Replacement, Rear Case: 步骤 2 中的图像 1，1

    • Use a pair of tweezers to peel the barcode sticker from the battery compartment.

    编辑

  4. Xbox 360 Wireless Controller Rear Case Replacement: 步骤 3 中的图像 1，1

    • Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.

    编辑

  5. Xbox 360 Wireless Controller Rear Case Replacement: 步骤 4 中的图像 1，2 Xbox 360 Wireless Controller Rear Case Replacement: 步骤 4 中的图像 2，2
    在这个步骤中使用的工具：
    Spudger
    $2.99

    • Insert a Spudger between the front and rear cases along the left edge of the controller.

    • Rotate the spudger toward the front of the controller, prying the two cases apart.

    编辑

  6. Xbox 360 Wireless Controller Rear Case Replacement: 步骤 5 中的图像 1，2 Xbox 360 Wireless Controller Rear Case Replacement: 步骤 5 中的图像 2，2

    • Insert a spudger between the front and rear cases, near the headphone jack.

    • Rotate the spudger toward the front of the controller to pry the two cases apart.

    编辑

  7. Xbox 360 Wireless Controller Rear Case Replacement: 步骤 6 中的图像 1，2 Xbox 360 Wireless Controller Rear Case Replacement: 步骤 6 中的图像 2，2

    • Grasp the controller by the battery compartment and the headphone jack.

    • Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.

    • The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

22等其他人完成本指南。

作者

与6其他贡献者

Brett Hartt

于04/12/10注册

125,652 声望

创作了143篇指南

徽章: 52

+ 49更多徽章

团队

iFixit iFixit 的会员

Community

140 名成员

创作了16,876篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 6

过去 7 天： 41

过去 30 天： 139

总计 22,278