跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

简介

This guide will lead you through the process of opening the battery panel of the WowWee MiPosaur for the purpose of replacing batteries.

  1. Use a Phillips head #1 screwdriver to remove 3 2mm screws from MiPosaur's underside panel.
    • Use a Phillips head #1 screwdriver to remove 3 2mm screws from MiPosaur's underside panel.

    • You may need to use an extension on your screwdriver to work around small space between the panel and the dinosaur's leg.

    • You can remove the bottom screw completely, but the top two screws are captive and do not need to be removed entirely.

  2. Firmly grasp the panel and pull apart from the base of the toy.
    • Firmly grasp the panel and pull apart from the base of the toy.

  3. Remove the battery from the device.
    • Remove the battery from the device.

结论

To reassemble your device, follow these instructions in reverse order.

Melissa Bender

于2018年08月09日注册

97 信誉积分

撰写一个指南

团队

iFixit, Team S1-G1, Weber Summer 2018 iFixit, Team S1-G1, Weber Summer 2018 的会员

FIX-WEBER-SU18S1G1

5 名成员

创作了35篇指南

Moving the MiPosaur along the ground will give it a burst of power, and so can create an electrical hazard when touching internal parts. If you keep moving it, the low battery sequence will commence and it will power off, even if the power switch is set to off. If you want to do this, drive it in fast circles.

Michael Deitz - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 18

总计 189