跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide is designed to help users remove MiP’s wheels. MiP has two wheels that are connected to its body with screws. If the wheels need replacement or cleaning, follow this guide.

  1. Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap. This plastic material is not replaceable. Any damage will be noticeable.
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. Remove the 12.0 mm Phillips #2 screw. Hold the wheel in place, or it will rotate as you attempt to remove the screw.
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. Pull the wheel off of the square axle.
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

  4. Remove the three 7.7 mm Phillips #1 screws. Remove the three 7.7 mm Phillips #1 screws.
    • Remove the three 7.7 mm Phillips #1 screws.

  5. Separate the rubber tire from the rim. Push the collar out to separate the plastic layers of the wheel. When reassembling, align the groove and the key of the two wheels' halves together.
    • Separate the rubber tire from the rim.

    • Push the collar out to separate the plastic layers of the wheel.

    • When reassembling, align the groove and the key of the two wheels' halves together.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Moira Keahon

于2014年09月24日注册

250 信誉积分

创作了3篇指南

团队

my MiP has plastic over his wheels

Clarrie O'HARE - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 28

总计 5,043