修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

WowWee MiP Robot LED Light Replacement

简介

The LED light on the MiP indicates what mode the robot is in. If this light is malfunctioning, using the MiP is difficult.

你所需要的

  1. WowWee MiP Robot LED Light Replacement, Battery: 步骤 1 中的图像 1，2 WowWee MiP Robot LED Light Replacement, Battery: 步骤 1 中的图像 2，2

    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

    翻译

  2. WowWee MiP Robot LED Light Replacement: 步骤 2 中的图像 1，2 WowWee MiP Robot LED Light Replacement: 步骤 2 中的图像 2，2

    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

    翻译

  3. WowWee MiP Robot LED Light Replacement, Wheel: 步骤 3 中的图像 1，2 WowWee MiP Robot LED Light Replacement, Wheel: 步骤 3 中的图像 2，2

    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

    翻译

  4. WowWee MiP Robot LED Light Replacement: 步骤 4 中的图像 1，2 WowWee MiP Robot LED Light Replacement: 步骤 4 中的图像 2，2

    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

    翻译

  5. WowWee MiP Robot LED Light Replacement: 步骤 5 中的图像 1，1

    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

    翻译

  7. WowWee MiP Robot LED Light Replacement, WowWee MiP Robot Body Disassembly: 步骤 6 中的图像 1，2 WowWee MiP Robot LED Light Replacement, WowWee MiP Robot Body Disassembly: 步骤 6 中的图像 2，2

    • Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.

    翻译

  8. WowWee MiP Robot LED Light Replacement: 步骤 7 中的图像 1，3 WowWee MiP Robot LED Light Replacement: 步骤 7 中的图像 2，3 WowWee MiP Robot LED Light Replacement: 步骤 7 中的图像 3，3

    • Remove the arms from the body.

    • Carefully open the body compartment.

    • Open the compartment slowly. There are wires connecting the two body pieces together. If pulled too hard, the wires and/or the motherboard could be damaged.

    翻译

  9. WowWee MiP Robot LED Light Replacement: 步骤 8 中的图像 1，1

    • Using precision tweezers, disconnect the following three bundles of wires:

    • Connecting the battery pack to the motherboard.

    • Connecting the power switch to the motherboard.

    • Connecting the speaker to the motherboard.

    翻译

  10. WowWee MiP Robot LED Light Replacement, LED Light: 步骤 9 中的图像 1，2 WowWee MiP Robot LED Light Replacement, LED Light: 步骤 9 中的图像 2，2

    • Remove the four 7.5mm Phillips #1 screws.

    翻译

  11. WowWee MiP Robot LED Light Replacement: 步骤 10 中的图像 1，2 WowWee MiP Robot LED Light Replacement: 步骤 10 中的图像 2，2

    • Carefully pull the motor and motherboard assembly straight out from the base.

    • Be careful not to break the plastic rods that go through the motor assembly and are connect to the shell.

    翻译

  12. WowWee MiP Robot LED Light Replacement: 步骤 11 中的图像 1，1

    • Use the precision tweezers to unplug the bundle of wires.

    翻译

  13. WowWee MiP Robot LED Light Replacement: 步骤 12 中的图像 1，1

    • Slide the head back to separate it from the body.

    • The motherboard does not need to be separated from the head to replace the LED light.

    翻译

  14. WowWee MiP Robot LED Light Replacement: 步骤 13 中的图像 1，1

    • Remove the 7.5mm Phillips #1 screw.

    • The LED light is soldered to the small circuit board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Courtney

于02/04/16注册

236 声望

撰写一个指南

徽章: 9

+ 6更多徽章

团队

USF Tampa, Team 3-4, Wollert Spring 2016 USF Tampa, Team 3-4, Wollert Spring 2016 的会员

USFT-WOLLERT-S16S3G4

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 13

总计 603