简介
The LED light on the MiP indicates what mode the robot is in. If this light is malfunctioning, using the MiP is difficult.
你所需要的
-
-
Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.
-
-
-
-
Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。