跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.

配件

没有特定配件。

  1. Remove the three 12.0 mm Phillips # 2 screws from the battery cover. Remove the three 12.0 mm Phillips # 2 screws from the battery cover.
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  3. Carefully pull the battery pack from the robot. Remove the batteries from the battery pack.
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Moira Keahon

于2014年09月24日注册

235 信誉积分

创作了3篇指南

团队

Its a programmer MIP not this kind.

Azariah Trumble - 回复

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta - 回复

does spare battery adapter vailable(not reachargeable)

coolboyz' channel - 回复

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie - 回复

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 14

过去的30天: 56

总计 9,913