跳转到主内容

WowWee MiP Robot Speaker Replacement

你所需要的

  1. WowWee MiP Robot  Speaker Replacement, Battery: 步骤 1 中的图像 1,2 WowWee MiP Robot  Speaker Replacement, Battery: 步骤 1 中的图像 2,2
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. WowWee MiP Robot  Speaker Replacement: 步骤 2 中的图像 1,2 WowWee MiP Robot  Speaker Replacement: 步骤 2 中的图像 2,2
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

  3. WowWee MiP Robot  Speaker Replacement, Wheel: 步骤 3 中的图像 1,2 WowWee MiP Robot  Speaker Replacement, Wheel: 步骤 3 中的图像 2,2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  4. WowWee MiP Robot  Speaker Replacement: 步骤 4 中的图像 1,2 WowWee MiP Robot  Speaker Replacement: 步骤 4 中的图像 2,2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  5. WowWee MiP Robot  Speaker Replacement: 步骤 5 中的图像 1,1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

  6. WowWee MiP Robot  Speaker Replacement, WowWee MiP Robot Body Disassembly: 步骤 6 中的图像 1,2 WowWee MiP Robot  Speaker Replacement, WowWee MiP Robot Body Disassembly: 步骤 6 中的图像 2,2
    • Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.

  7. WowWee MiP Robot  Speaker Replacement: 步骤 7 中的图像 1,3 WowWee MiP Robot  Speaker Replacement: 步骤 7 中的图像 2,3 WowWee MiP Robot  Speaker Replacement: 步骤 7 中的图像 3,3
    • Remove the arms from the body.

    • Carefully open the body compartment.

    • Open the compartment slowly. There are wires connecting the two body pieces together. If pulled too hard, the wires and/or the motherboard could be damaged.

  8. WowWee MiP Robot  Speaker Replacement: 步骤 8 中的图像 1,1
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Using precision tweezers, disconnect the following three bundles of wires:

    • Connecting the battery pack to the motherboard.

    • Connecting the power switch to the motherboard.

    • Connecting the speaker to the motherboard.

  9. WowWee MiP Robot  Speaker Replacement, Speaker: 步骤 9 中的图像 1,2 WowWee MiP Robot  Speaker Replacement, Speaker: 步骤 9 中的图像 2,2
    • Remove the two 7.5 mm Phillips #1 screws holding the speaker bracket in place.

  10. WowWee MiP Robot  Speaker Replacement: 步骤 10 中的图像 1,1
    • Remove the plastic bracket covering the speaker.

  11. WowWee MiP Robot  Speaker Replacement: 步骤 11 中的图像 1,1
    • Gently remove the speaker from the MiP.

    • During reassembly, be sure to place the speaker in the same position.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team 3-4, Wollert Spring 2016 USF Tampa, Team 3-4, Wollert Spring 2016 的会员

USFT-WOLLERT-S16S3G4

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 5

总计 533