修复你的物品 社区 商店

Wolf Gourmet WGBL100S Power Cord Replacement

简介

If your power cord is broken and your blender will not turn on, follow these steps to replace it.

你所需要的

  1. Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: 步骤 1 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: 步骤 1 中的图像 2，2

    • With the bottom of the blender facing up, use a Phillips #2 screwdriver to remove the 4, 1/2 inch long screws in the corners of the device.

    • Ensure the blender is off and unplugged before starting.

    翻译

  2. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 2 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 2 中的图像 2，2

    • Using a metal spudger, pry up one side of each of the rubber feet.

    • Note that one side of each foot is glued down; pry up the non-glued side.

    翻译

  3. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 3 中的图像 1，1

    • Using the same Phillips #2 screwdriver, unscrew the 1/2 inch long screw under each of the feet.

    翻译

  4. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 4 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 4 中的图像 2，2

    • Pull off the base and remove the plastic housing underneath.

    翻译

  6. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 5 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 5 中的图像 2，2

    • On the underside of the base, unscrew the three 3/8" long screws on the plastic piece holding the power cord in place using a Phillips #1 screwdriver.

    • Pull the plastic cover off.

    翻译

  7. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 6 中的图像 1，1

    • Using a wire cutter, cut the three wires of the power cord.

    翻译

  8. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 7 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 7 中的图像 2，2

    • Pull the cut power cord through the base.

    • Then thread the replacement cord back through and re-attach the plastic cover.

    翻译

  9. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 8 中的图像 1，3 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 8 中的图像 2，3 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 8 中的图像 3，3

    • Strip about an inch of insulation off of the snipped power cord and your replacement cord.

    • Twist each strand of wires together to keep them neat.

    翻译

  10. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 9 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 9 中的图像 2，2

    • Twist together the wires from the replacement cord to the wires still attached to the blender.

    • Solder the connection if possible.

    翻译

  11. Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 10 中的图像 1，2 Wolf Gourmet WGBL100S Power Cord Replacement: 步骤 10 中的图像 2，2

    • Wrap all the connections in electrical tape or heat shrink tubing.

    翻译
结论

To reassemble your device, follow steps 1-5 in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Cole Gillespie

于04/19/18注册

476 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team S25-G16, Maness Spring 2018 Cal Poly, Team S25-G16, Maness Spring 2018 的会员

CPSU-MANESS-S18S25G16

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 228