简介
Use this guide to replace the auger motor assembly in an older Whirlpool side‑by‑side refrigerator
The auger motor assembly drives the auger which feeds ice to the ice dispenser located on the freezer door.
If the auger motor assembly fails the refrigerator will not dispense ice.
This guide is based on a Whirlpool Model ED5FTGXKQ02 Refrigerator.
你所需要的
-
-
-
Use a nut driver to remove the screws securing the auger motor assembly.
-
-
-
Move the auger assembly outward and lower it to rest on the shelf below.
-
-
-
Use your fingers, a spudger, or a small flathead screwdriver to pry and release the tab on the connector.
-
Pull the auger motor assembly connector straight out to disconnect it.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
Take your e-waste to an R2 or e-Stewards certified recycler.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
Take your e-waste to an R2 or e-Stewards certified recycler.