跳转到主内容

简介

One possible reason for your device not powering on is a damaged power switch. Use this guide to replace it.

配件

没有特定配件。

  1. Unscrew the locking sleeve.
    • Unscrew the locking sleeve.

  2. Remove the hanging clip.
    • Remove the hanging clip.

  3. Unscrew the six 8mm PH2 screws. Unscrew the six 8mm PH2 screws.
    • Unscrew the six 8mm PH2 screws.

  4. While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. To remove the front panel, pry the device apart while holding the device with the other hand.
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Firmly grasp and lift out power switch.
    • Firmly grasp and lift out power switch.

  7. Firmly grasp and disconnect cables.
    • Firmly grasp and disconnect cables.

    • Make sure to mark your cable positions so you do not reverse them when putting back together.

结论

To reassemble your device, follow these instructions in reverse order.

Joshua Bowery

于2016年02月08日注册

471 信誉积分

创作了3篇指南

团队

USF Tampa, Team 12-1, Eyestone Spring 2016 USF Tampa, Team 12-1, Eyestone Spring 2016 的会员

USFT-EYESTONE-S16S12G1

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 6

总计 239