跳转到主内容

Water Damage on main board of Nokia 206 RM873

你所需要的

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 步骤 1 中的图像 1,3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 步骤 1 中的图像 2,3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 步骤 1 中的图像 3,3
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: 步骤 2 中的图像 1,2 Water Damage on main board of Nokia 206 RM873: 步骤 2 中的图像 2,2
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: 步骤 3 中的图像 1,2 Water Damage on main board of Nokia 206 RM873: 步骤 3 中的图像 2,2
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

    Nokia 206 display and charger

    Mithilesh Yadav - 回复

  4. Water Damage on main board of Nokia 206 RM873: 步骤 4 中的图像 1,3 Water Damage on main board of Nokia 206 RM873: 步骤 4 中的图像 2,3 Water Damage on main board of Nokia 206 RM873: 步骤 4 中的图像 3,3
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  5. Water Damage on main board of Nokia 206 RM873: 步骤 5 中的图像 1,3 Water Damage on main board of Nokia 206 RM873: 步骤 5 中的图像 2,3 Water Damage on main board of Nokia 206 RM873: 步骤 5 中的图像 3,3
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  6. Water Damage on main board of Nokia 206 RM873: 步骤 6 中的图像 1,2 Water Damage on main board of Nokia 206 RM873: 步骤 6 中的图像 2,2
    • How and where to use the cotton swabs.

结论

To reassemble your device, follow these instructions in reverse order.

16等其他人完成本指南。

Kevin D

于05/02/14注册

7,276 声望

创作了21篇指南

4条评论

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - 回复

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - 回复

Nokia 206 display and charger pin

Mithilesh Yadav - 回复

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 26

总计 10,767