跳转到主内容

Waring Pro SB30 Plastic Sides Replacement

你所需要的

  1. Waring Pro SB30 Plastic Sides Replacement, Back Panel: 步骤 1 中的图像 1,1
    • Remove the screws on the back panel with the #1 Phillips screwdriver bit.

    • The screws in the rubber legs of the burner do not need to be removed.

    • If the back panel has never been opened before, the screws may be more difficult to unscrew.

  2. Waring Pro SB30 Plastic Sides Replacement: 步骤 2 中的图像 1,2 Waring Pro SB30 Plastic Sides Replacement: 步骤 2 中的图像 2,2
    • Using a wrench, remove the bolt from the center of the back panel.

  3. Waring Pro SB30 Plastic Sides Replacement: 步骤 3 中的图像 1,1
    • The back panel can now be easily lifted off.

  4. Waring Pro SB30 Plastic Sides Replacement, Plastic Sides: 步骤 4 中的图像 1,2 Waring Pro SB30 Plastic Sides Replacement, Plastic Sides: 步骤 4 中的图像 2,2
    • Using a #1 Phillips screwdriver bit or a ratchet wrench with a Phillips screwdriver bit to remove screws located on the interior frame.

    • The interior edges of the metal frame are sharp and can cause minor cuts.

  5. Waring Pro SB30 Plastic Sides Replacement: 步骤 5 中的图像 1,1
    • Plastic sides should be easily removed after all screws are taken out.

结论

To reassemble your device, follow these instructions in reverse order.

Sun Fai Lau

于09/22/14注册

588 声望

创作了5篇指南

团队

USF Tampa, Team 10-7, Brown Fall 2014 USF Tampa, Team 10-7, Brown Fall 2014 的会员

USFT-BROWN-F14S10G7

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 1

总计 219