修复你的物品 社区 商店

Vtech Touch and Swipe Baby Phone Power Switch Replacement

你所需要的

  1. Vtech Touch and Swipe Baby Phone Power Switch Replacement, Battery: 步骤 1 中的图像 1，2 Vtech Touch and Swipe Baby Phone Power Switch Replacement, Battery: 步骤 1 中的图像 2，2

    • Using a Phillips #1 screwdriver, remove the 4.8mm screw on the battery cover by twisting the screwdriver counter-clockwise.

    翻译

  2. Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 2 中的图像 1，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 2 中的图像 2，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 2 中的图像 3，3

    • Remove the two AAA batteries by pulling on one end of the battery and lifting it straight out.

    翻译

  4. Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 3 中的图像 1，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 3 中的图像 2，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 3 中的图像 3，3

    • When reassembling, align the notch on the battery panel with the slot on the phone.

    翻译

  5. Vtech Touch and Swipe Baby Phone Power Switch Replacement, Power Switch: 步骤 4 中的图像 1，2 Vtech Touch and Swipe Baby Phone Power Switch Replacement, Power Switch: 步骤 4 中的图像 2，2

    • Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver.

    翻译

  6. Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 5 中的图像 1，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 5 中的图像 2，3 Vtech Touch and Swipe Baby Phone Power Switch Replacement: 步骤 5 中的图像 3，3

    • Lift directly up to remove the switch and lay the wire down to the side.

    • Once the switch has been taken out you can remove the switch's casing.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

tellocordova

于09/04/15注册

342 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

团队

USF Tampa, Team 2-4, Sullivan Fall 2015 USF Tampa, Team 2-4, Sullivan Fall 2015 的会员

USFT-SULLIVAN-F15S2G4

3 名成员

创作了12篇指南

2条评论

Good work.

I have done it the same way,

the wire at the switch was bad soldered,

but it was easy to repair it and i soldered it new.

Nice.

Schwarzstein - 回复

My baby’s phone keeps turning itself off. The switch is in the ON position but it keeps turning OFF and singing the off song. I have opened the phone and even held the switch to ON but it still keeps turning OFF even without the switch moving. Any suggestions?

shakinsher - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 627