跳转到主内容

Vtech Kidibeats Drum Set Speaker Replacement

你所需要的

  1. Vtech Kidibeats Drum Set Speaker Replacement, Back Panel: 步骤 1 中的图像 1,1
    • Locate the battery panel that is centered between the three leg supports at the bottom of the drum set.

  2. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 2 中的图像 1,1
    • To remove the battery panel, loosen the 10 mm panel screw using a flathead 4.0 screwdriver.

    • You can also use a small coin to loosen the screw.

  3. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 3 中的图像 1,1
    • Using your fingers, pry open and remove the back battery panel.

  4. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 4 中的图像 1,1
    • Use your fingers to remove each battery from its housing.

  5. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 5 中的图像 1,1
    • Using a Phillips #2 screwdriver, loosen and remove the six 14 mm screws.

  6. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 6 中的图像 1,2 Vtech Kidibeats Drum Set Speaker Replacement: 步骤 6 中的图像 2,2
    • With your hands, separate the bottom panel from the drum set.

    • When removing the bottom panel, be careful not to pull too hard in order to prevent damaging the connections from the motherboard to the speaker and power source.

  7. Vtech Kidibeats Drum Set Speaker Replacement, Speaker: 步骤 7 中的图像 1,1
    • Loosen and remove the two 10mm screws using a Phillips #00 screwdriver.

  8. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 8 中的图像 1,1
    • Using your hand, gently remove speaker from its housing.

  9. Vtech Kidibeats Drum Set Speaker Replacement: 步骤 9 中的图像 1,1
    • Using a soldering station, carefully desolder the connection points on the speaker.

    • To review soldering safety and techniques, please visit 如何焊接和拆焊.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

USF Tampa, Team 2-8, Cagle Spring 2016 USF Tampa, Team 2-8, Cagle Spring 2016 的会员

USFT-CAGLE-S16S2G8

2 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 576