修复你的物品 社区 商店

Vizio VTAB1008 Digitizer (Touchscreen) Replacement

简介

Hello! This guide will show you how to replace the digitizer on your Vizio VTAB1008.

你所需要的

  1. Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Vizio VTAB1008 Back Cover Removal: 步骤 1 中的图像 1，2 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Vizio VTAB1008 Back Cover Removal: 步骤 1 中的图像 2，2

    • Carefully slide the heavy duty opening tool between the gap on the side of the device with no buttons.

    • Do not insert the opening tool too far into the tablet as this can damage connectors close to edges of the cover.

    • The angled tip of the opening tool can be wedged into the device by pressing on the back of the opening tool with the thumb. Move the opening tool in a sliding motion to ensure all tabs separate.

    • Corner tabs may require a more forceful prying tool. If needed, carefully insert the metal prying tool into corners to separate the tabs.

    编辑

  2. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 2 中的图像 1，1

    • Look into the tablet for loose connectors.

    • There are three loose connectors: one for the screen, one for the digitizer, and one for the motherboard. They are held in place by the pressure of the backing and screen assemblies.

    • Flip the backing from the button-less side over, being careful not to separate the ribbon connector from the display screen.

    编辑

  4. Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 步骤 3 中的图像 1，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 步骤 3 中的图像 2，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement, Digitizer/Touch Screen: 步骤 3 中的图像 3，3

    • Remove the two screws present using the J1 Screw bit.

    • The screw has a head size of 4.3 mm and is 3 mm tall.

    编辑

  5. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 4 中的图像 1，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 4 中的图像 2，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 4 中的图像 3，3

    • Remove the two brackets accompanying screws by lifting them up and away from the screen.

    • Brackets are 8.5 mm by 6.55 mm.

    编辑

  6. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 5 中的图像 1，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 5 中的图像 2，3 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 5 中的图像 3，3

    • Separate the screen digitizer from the display screen, noting the placement of the quick disconnect ribbon cable.

    • Use a spudger if necessary to assist in the separation.

    编辑

  7. Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 6 中的图像 1，2 Vizio VTAB1008 Digitizer (Touchscreen) Replacement: 步骤 6 中的图像 2，2

    • The digitizer should now be able to be freely removed.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 650