修复你的物品 社区 商店

Verizon Ellipsis 10 Speaker Replacement

简介

This guide is designed to provide you with simple steps to remove and replace the Verizon Ellipsis 10 Speaker. This replacement will resolve any sound quality issues.

你所需要的

  1. Verizon Ellipsis 10 Speaker Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Open the SD/SIM card cover to start prying off the back cover.

    编辑

  2. Verizon Ellipsis 10 Speaker Replacement: 步骤 2 中的图像 1，1

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    编辑

  3. Verizon Ellipsis 10 Speaker Replacement: 步骤 3 中的图像 1，1

    • Follow along the edge of the device to undo all of the retaining clips.

    编辑

  4. Verizon Ellipsis 10 Speaker Replacement: 步骤 4 中的图像 1，1

    • Once all the clips are undone, the back panel should come off with little effort.

    编辑

  6. Verizon Ellipsis 10 Speaker Replacement, Battery: 步骤 5 中的图像 1，1

    • Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

    编辑

  7. Verizon Ellipsis 10 Speaker Replacement: 步骤 6 中的图像 1，1

    • Remove the top piece of tape using an iFixit opening tool.

    编辑

  8. Verizon Ellipsis 10 Speaker Replacement: 步骤 7 中的图像 1，1

    • Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

    编辑

  9. Verizon Ellipsis 10 Speaker Replacement: 步骤 8 中的图像 1，1

    • Unplug the battery power connector by sliding the white plastic plug down away from the board.

    编辑

  10. Verizon Ellipsis 10 Speaker Replacement: 步骤 9 中的图像 1，1

    • The battery should be free to come out of the device. Make sure not to bend or damage the battery.

    编辑

  11. Verizon Ellipsis 10 Speaker Replacement, Speaker: 步骤 10 中的图像 1，1

    • Using a Phillips #00 screwdriver, remove the four M1.5 screws from the right speaker.

    编辑

  12. Verizon Ellipsis 10 Speaker Replacement: 步骤 11 中的图像 1，1

    • Remove the black and white wires connected to the motherboard by pulling up on their connections.

    • Remove the three strips of tape.

    编辑

  13. Verizon Ellipsis 10 Speaker Replacement: 步骤 12 中的图像 1，1

    • Remove the four M1.5 screws on the left speaker.

    • Remove the speakers from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 143