跳转到主内容
  1. Flip laptop over so that "Service TAG" is at the top left.
    • Flip laptop over so that "Service TAG" is at the top left.

  2. Remove screw at bottom right hand corner.
    • Remove screw at bottom right hand corner.

  3. Remove plate by pushing lightly and sliding to the right.
    • Remove plate by pushing lightly and sliding to the right.

  4. Unscrew 4 screws around hard drive. Unscrew 4 screws around hard drive.
    • Unscrew 4 screws around hard drive.

  5. Remove hard drive by pulling upwards on right side of drive
    • Remove hard drive by pulling upwards on right side of drive

    • When inserting new hard drive note that there is a slot on the left where the hard drive port slides into.

结论

To reassemble your device, follow these instructions in reverse order.

Chris Griffin

于2014年03月12日注册

110 信誉积分

撰写一个指南

团队

UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 的会员

UMASSD-VIJAYBHASKAR-S14S2G6

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 116