跳转到主内容

VTechCS6719-16 Ringer Replacment

你所需要的

  1. VTechCS6719-16 Ringer Replacment, Ringer: 步骤 1 中的图像 1,1
    • Remove sliding back cover from case.

  2. VTechCS6719-16 Ringer Replacment: 步骤 2 中的图像 1,1
    • Lift the battery and unplug the two pin cable from phone base.

  3. VTechCS6719-16 Ringer Replacment: 步骤 3 中的图像 1,1
    • Slide back cover off the phone

    • Located at the bottom of the frame are the two-10 mm screws.

    • Use a Phillips head screwdriver to remove both 10 mm screws.

    • It is recommended to use a magnetic mat or place the screws on an easy to see surface. They will be needed when the phone is reassembled.

  4. VTechCS6719-16 Ringer Replacment: 步骤 4 中的图像 1,1
    • After removing the two screws from the back of the phone carefully use the metal spudger to lift along the edges and raise the phone case from the internal clips.

  5. VTechCS6719-16 Ringer Replacment: 步骤 5 中的图像 1,1
    • Once the case is lifted, the board should be freed except for the connection between the ringer and the case.

    • Be careful do not pull the case away from the phone in a jerking or aggressive motion.

  6. VTechCS6719-16 Ringer Replacment: 步骤 6 中的图像 1,1
    • Using the spudger lift the latch over the ringer to release it.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger should be used whenever possible.

  7. VTechCS6719-16 Ringer Replacment: 步骤 7 中的图像 1,1
    • The last component of the latch is soldered to the circuit board. This will take some soldering expertise.

结论

To reassemble your device, follow these instructions in reverse order.

Charles montes

于10/20/16注册

513 声望

创作了5篇指南

团队

UMass Dartmouth, Team 5-5, Martin Fall 2016 UMass Dartmouth, Team 5-5, Martin Fall 2016 的会员

UMASSD-MARTIN-F16S5G5

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 206