跳转到主内容

VTech Record and Learn KidiStudio Whammy Bar Replacement

你所需要的

  1. VTech Record and Learn KidiStudio Whammy Bar Replacement, Whammy Bar: 步骤 1 中的图像 1,2 VTech Record and Learn KidiStudio Whammy Bar Replacement, Whammy Bar: 步骤 1 中的图像 2,2
    • Unscrew 11 PH2 screws (7 mm).

    • Remove black plastic backing.

    • Remove the batteries from the toy before beginning replacement of the whammy bar.

  2. VTech Record and Learn KidiStudio Whammy Bar Replacement: 步骤 2 中的图像 1,2 VTech Record and Learn KidiStudio Whammy Bar Replacement: 步骤 2 中的图像 2,2
    • Remove PH2 screw (5 mm) from yellow/gold colored circuit board and pull back to access the whammy component.

  3. VTech Record and Learn KidiStudio Whammy Bar Replacement: 步骤 3 中的图像 1,2 VTech Record and Learn KidiStudio Whammy Bar Replacement: 步骤 3 中的图像 2,2
    • Remove 3 PH2 (5 mm) screws connected to the whammy bar component.

    • Remove blue piece from back of the device. This will free the whammy bar. Replace the whammy bar with new part.

结论

To reassemble your device, follow these instructions in reverse order.

Shaina Carbonel

于02/01/16注册

537 声望

创作了5篇指南

团队

UW Tacoma, Team 1-1, Rose Winter 2016 UW Tacoma, Team 1-1, Rose Winter 2016 的会员

UWT-ROSE-W16S1G1

5 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 4

总计 205