跳转到主内容

VTech Learning Tunes Karaoke Mode Selector Replacement

你所需要的

  1. VTech Learning Tunes Karaoke Mode Selector Replacement, Mode Selector: 步骤 1 中的图像 1,1
    • To remove the battery door, loosen the 4mm Flathead screw.

    • A coin can also be used to loosen the screw.

  2. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 2 中的图像 1,2 VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 2 中的图像 2,2
    • Remove the battery door and take out the batteries.

  3. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 3 中的图像 1,1
    • Remove the six 9.5 mm Phillips #2 screws.

    • Remove the six 6.0 mm Phillips #2 screws.

  4. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 4 中的图像 1,2 VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 4 中的图像 2,2
    • Gently pull up on the rear panel.

    • Be careful to not pull on the wire connections.

    • Gently place the back panel underneath the top panel with the tops facing each other, as shown in the picture.

  5. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 5 中的图像 1,1
    • Remove the two 7.9 mm Phillips #1 mode switch board screws.

  6. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 6 中的图像 1,2 VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 6 中的图像 2,2
    • Once the screws have been removed, carefully move the mode switch board to expose the mode switch assembly underneath.

  7. VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 7 中的图像 1,2 VTech Learning Tunes Karaoke Mode Selector Replacement: 步骤 7 中的图像 2,2
    • Using a Philips #1 screwdriver, remove the two 5.6 mm screws on the switch.

    • Once the screws have been removed, you can easily remove the mode switch.

结论

To reassemble your device, follow these instructions in reverse order.

Adam Chaberek

于02/09/16注册

137 声望

撰写一个指南

团队

USF Tampa, Team 7-2, Cheng Spring 2016 USF Tampa, Team 7-2, Cheng Spring 2016 的会员

USFT-CHENG-S16S7G2

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 272