修复你的物品 社区 商店

VTech Kidizoom Smartwatch DX2 Wristband Replacement

简介

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

你所需要的

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: 步骤 1 中的图像 1，1

    • Begin by placing the watch on its side.

    编辑

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 步骤 2 中的图像 1，1

    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

    编辑

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 步骤 3 中的图像 1，1

    • Pull the pin out, however not fully, feeling slight resistance is normal.

    编辑

  5. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 步骤 4 中的图像 1，1

    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Sydney

于10/25/18注册

344 声望

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

UMass Dartmouth, Team S3-G5, Peak Fall 2018 UMass Dartmouth, Team S3-G5, Peak Fall 2018 的会员

UMASSD-PEAK-F18S3G5

4 名成员

创作了7篇指南

一条评论

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 10

过去 30 天： 35

总计 7,228