修复你的物品 社区 商店

VTech Kidizoom Smartwatch DX2 Battery Replacement

简介

If your Smartwatch is not charging, and you tested the cables, then the battery may need to be replaced. This guide will show you how to do this.

你所需要的

  1. VTech Kidizoom Smartwatch DX2 Battery Replacement, Master Switch: 步骤 1 中的图像 1，2 VTech Kidizoom Smartwatch DX2 Battery Replacement, Master Switch: 步骤 1 中的图像 2，2

    • Begin by flipping the watch over with its back facing upwards.

    编辑

  2. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 2 中的图像 1，2 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 2 中的图像 2，2

    • Next, use the Phillips #00 screwdriver to unscrew the four 6.0 mm screws located in each corner of the watch to remove the backplate.

    编辑

  3. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 3 中的图像 1，2 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 3 中的图像 2，2

    • Gently lift the backplate up to remove it.

    编辑

  5. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 4 中的图像 1，3 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 4 中的图像 2，3 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 4 中的图像 3，3

    • After removing the backplate, lift the master switch up from the circuit board.

    编辑

  6. VTech Kidizoom Smartwatch DX2 Battery Replacement, Motherboard: 步骤 5 中的图像 1，1

    • Using a Phillips #00 screwdriver, remove the 0.6 mm screw.

    编辑

  7. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 6 中的图像 1，2 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 6 中的图像 2，2

    • Carefully remove the speaker from the case without disconnecting it from the motherboard.

    编辑

  8. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 7 中的图像 1，2 VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 7 中的图像 2，2

    • Using the tweezers, carefully lift the bar holding the connection to the screen.

    • Remove the motherboard from the device.

    编辑

  9. VTech Kidizoom Smartwatch DX2 Battery Replacement, Battery: 步骤 8 中的图像 1，1

    • Carefully pry the battery off of the circuit board using the plastic opening tool.

    编辑

  10. VTech Kidizoom Smartwatch DX2 Battery Replacement: 步骤 9 中的图像 1，1

    • De-solder the wires connecting the battery to the circuit board.

    • Remove the battery.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Jessica Richard

于10/25/18注册

512 声望

创作了4篇指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team S3-G5, Peak Fall 2018 UMass Dartmouth, Team S3-G5, Peak Fall 2018 的会员

UMASSD-PEAK-F18S3G5

4 名成员

创作了7篇指南

4条评论

Hey guys, My VTech watch is plugged in but once I turn it on it does but then shows a dead battery. I actually didn’t play with it for a while and I left it dead battery.

Gabriel Baker - 回复

So I might try this trick and see if it works.

Gabriel Baker - 回复

Sometime i’ll try it

Gabriel Baker - 回复

when I have the right tools

Gabriel Baker - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 15

过去 30 天： 113

总计 9,092