跳转到主内容

修复你的物品

维修的权力

商店

工具

配件

没有特定配件。

  1. Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember. The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.
    • Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember.

    • The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.

    • The saddle is the round metal part of the jack that moves upward as you pump the jack up.

  2. Push downward on the jack's lever to lift the saddle upward so that it contacts the crossmember. Continue pushing downward on the lever to lift the car upward.
    • Push downward on the jack's lever to lift the saddle upward so that it contacts the crossmember. Continue pushing downward on the lever to lift the car upward.

  3. Place the jack stand under the jack mounting point.
    • Place the jack stand under the jack mounting point.

    • The jack mounting point is a metallic protrusion beneath each of the car doors.

  4. Raise the jack stand until it contacts the jack mounting point.
    • Raise the jack stand until it contacts the jack mounting point.

    • In the event the floor jack fails, the jack stand is designed to prevent the car from falling.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Shaun MacDonald

于2012年10月03日注册

2,271 信誉积分

创作了8篇指南

团队

Cal Poly, Team 24-27, Regan Fall 2012 Cal Poly, Team 24-27, Regan Fall 2012 的会员

CPSU-REGAN-F12S24G27

4 名成员

创作了21篇指南

添加评论

浏览统计数据:

过去的24小时: 9

过去的7天: 67

过去的30天: 404

总计 29,213