跳转到主内容

Unsticking SteelSeries Nimbus Triggers

你所需要的

  1. Unsticking SteelSeries Nimbus Triggers, Unsticking SteelSeries Nimbus Triggers: 步骤 1 中的图像 1,1
    • When your triggers get stickier than the Cheeto® dust on your hands it might be time for an intervention.

  2. Unsticking SteelSeries Nimbus Triggers: 步骤 2 中的图像 1,2 Unsticking SteelSeries Nimbus Triggers: 步骤 2 中的图像 2,2
    • Start off by removing the four TR9 Torx Security screws on the back of the controller.

  3. Unsticking SteelSeries Nimbus Triggers: 步骤 3 中的图像 1,3 Unsticking SteelSeries Nimbus Triggers: 步骤 3 中的图像 2,3 Unsticking SteelSeries Nimbus Triggers: 步骤 3 中的图像 3,3
    • The two screws on the top are further inset than the others. You can use the iFixit 1/4" to 4 mm Driver Adapter as an extender.

  4. Unsticking SteelSeries Nimbus Triggers: 步骤 4 中的图像 1,2 Unsticking SteelSeries Nimbus Triggers: 步骤 4 中的图像 2,2
    • The case is now open, but it's still held together by two clips on the top.

  5. Unsticking SteelSeries Nimbus Triggers: 步骤 5 中的图像 1,3 Unsticking SteelSeries Nimbus Triggers: 步骤 5 中的图像 2,3 Unsticking SteelSeries Nimbus Triggers: 步骤 5 中的图像 3,3
    • Apply a gentle twisting motion to separate the first clip.

    • Twist in the other direction to separate the second clip.

    • The top is now free!

  6. Unsticking SteelSeries Nimbus Triggers: 步骤 6 中的图像 1,3 Unsticking SteelSeries Nimbus Triggers: 步骤 6 中的图像 2,3 Unsticking SteelSeries Nimbus Triggers: 步骤 6 中的图像 3,3
    • Be mindful of the three cables still connecting the two halves.

  7. Unsticking SteelSeries Nimbus Triggers: 步骤 7 中的图像 1,2 Unsticking SteelSeries Nimbus Triggers: 步骤 7 中的图像 2,2
    • Here's our problem, the rubber pad has fallen off of the plastic stop leaving only the glue behind.

    • The rubber pad should still be in the controller somewhere (happy hunting) or if you're not in the mood for hide and seek any kind of foam will work as a replacement.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Jonathan

于03/13/13注册

464 声望

创作了2篇指南

4条评论

Great, concise fix instructions!

Brian Pippen - 回复

My nimbus started to have sticky triggers. I could not believe that I had found this solution! Awesome!

Max-Heinrich Laves - 回复

Hi, I have a Nimbus + controller. It's seems to have clips at the back too. Any advice on how to open it?

Sean Hudson - 回复

Greetings, someone who can help me where I can get the joystick, original remote control ?

Excellent information

bryan Andino - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 12

过去 30 天: 38

总计 6,079