修复你的物品 社区 商店

Unnecto Drone M Headphone Jack Replacement

你所需要的

  1. Unnecto Drone M Headphone Jack Replacement, Unnecto Drone M Disassembly: 步骤 1 中的图像 1，2 Unnecto Drone M Headphone Jack Replacement, Unnecto Drone M Disassembly: 步骤 1 中的图像 2，2

    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

    编辑

  2. Unnecto Drone M Headphone Jack Replacement: 步骤 2 中的图像 1，1

    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

    编辑

  3. Unnecto Drone M Headphone Jack Replacement: 步骤 3 中的图像 1，1

    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

    编辑

  4. Unnecto Drone M Headphone Jack Replacement: 步骤 4 中的图像 1，1

    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

    编辑

  6. Unnecto Drone M Headphone Jack Replacement: 步骤 5 中的图像 1，2 Unnecto Drone M Headphone Jack Replacement: 步骤 5 中的图像 2，2

    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

    编辑

  7. Unnecto Drone M Headphone Jack Replacement: 步骤 6 中的图像 1，1

    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

    编辑

  8. Unnecto Drone M Headphone Jack Replacement: 步骤 7 中的图像 1，1

    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

    编辑

  9. Unnecto Drone M Headphone Jack Replacement: 步骤 8 中的图像 1，2 Unnecto Drone M Headphone Jack Replacement: 步骤 8 中的图像 2，2

    • Set aside the circuit board from the screen protector.

    编辑

  10. Unnecto Drone M Headphone Jack Replacement, Headphone Jack: 步骤 9 中的图像 1，3 Unnecto Drone M Headphone Jack Replacement, Headphone Jack: 步骤 9 中的图像 2，3 Unnecto Drone M Headphone Jack Replacement, Headphone Jack: 步骤 9 中的图像 3，3

    • Desolder the headphone jack using a soldering iron on each of the 6 points holding it down.

    • Be careful to not damage the circuit board.

    编辑

  11. Unnecto Drone M Headphone Jack Replacement: 步骤 10 中的图像 1，2 Unnecto Drone M Headphone Jack Replacement: 步骤 10 中的图像 2，2

    • Solder on a new headphone jack.

    编辑

  12. Unnecto Drone M Headphone Jack Replacement: 步骤 11 中的图像 1，1

    • Make sure the new jack is aligned properly and securely soldered to the circuit board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 1

总计 170