1. Place the phone facedown on a cleared work area
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

    添加评论

  2. Grip the top right corner of the battery.
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

    添加评论

    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

    添加评论

    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

    添加评论

    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

    添加评论

    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

    添加评论

    • Set aside the circuit board from the screen protector.

    添加评论

    • Peel back the speaker using fine-tipped tweezers

    • Use caution when removing the earpiece speaker

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Esteban Almeida

于2018年02月08日注册

329 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 43