修复你的物品 社区 商店

Uniden D1688 multistation and handset disassembly

简介

We will teach you how to successfully take apart the phone system to do any repairs and be able to fully but it back together.

你所需要的

  1. Uniden D1688 multistation and handset disassembly, Uniden D1688 multistation and handset disassembly: 步骤 1 中的图像 1，1

    • Unplug the phone from the base by detaching the RJ-11 plug.

    • Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.

    编辑

  2. Uniden D1688 multistation and handset disassembly: 步骤 2 中的图像 1，1

    • Using the spudger, separate the top shell of the base from the bottom shell from the base.

    • Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!

    编辑

  3. Uniden D1688 multistation and handset disassembly: 步骤 3 中的图像 1，1

    • Unscrew the 3 screws (Head Size: 4mm Length: 8.6 mm) from the top shell circuit board.

    编辑

  4. Uniden D1688 multistation and handset disassembly: 步骤 4 中的图像 1，1

    • Unscrew the 2 screws (Head Size: 4mm Length: 8.66) on the small circuit board in the top shell.

    编辑

  5. Uniden D1688 multistation and handset disassembly: 步骤 5 中的图像 1，1

    • Disconnect the ribbon cable from the bottom shell circuit board.

    编辑

  7. Uniden D1688 multistation and handset disassembly: 步骤 6 中的图像 1，1

    • Release the speaker from the locking pin by pushing down on each ending side of the pin and pushing it away from the speaker.

    编辑

  8. Uniden D1688 multistation and handset disassembly: 步骤 7 中的图像 1，1

    • Remove rubber keyboard underlay from top shell.

    编辑

  9. Uniden D1688 multistation and handset disassembly: 步骤 8 中的图像 1，1

    • Push the plastic keyboard pieces out of the top shell.

    编辑

  10. Uniden D1688 multistation and handset disassembly: 步骤 9 中的图像 1，1

    • Unscrew bottom shell circuit board screws (Head size: 4mm Length: 8.6mm).

    编辑

  11. Uniden D1688 multistation and handset disassembly: 步骤 10 中的图像 1，1

    • The disassembly of the phone base is complete!

    • Now this guide will move on to taking apart one of the handsets.

    编辑

  12. Uniden D1688 multistation and handset disassembly: 步骤 11 中的图像 1，1

    • Slide the battery cover off of the handset, and unplug the battery.

    编辑

  13. Uniden D1688 multistation and handset disassembly: 步骤 12 中的图像 1，1

    • Remove the battery, and unscrew the two screws (Head Size: 4mm Length: 8.6 mm).

    编辑

  14. Uniden D1688 multistation and handset disassembly: 步骤 13 中的图像 1，1

    • Use spudger to separate the phone shell.

    编辑

  15. Uniden D1688 multistation and handset disassembly: 步骤 14 中的图像 1，1

    • Unscrew the two screws (Head Size: 4mm Length: 8.6mm) on the bottom shell keeping the speaker locking pin in place.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与7其他贡献者

Nicholas Weeks

于01/27/15注册

101 声望

撰写一个指南

徽章: 3

团队

Pasco Hernando, Team 1-4, Prince Winter 2015 Pasco Hernando, Team 1-4, Prince Winter 2015 的会员

PHSC-PRINCE-W15S1G4

6 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 522