跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

If your URPOWER V2 Ultrasonic Aroma Essential Diffuser is making a buzzing noise, use this guide to replace the Coolcox CC5010M12S fan. The fan can have a faulty blade that creates a buzzing noise when on.

Before beginning make sure there is no water in the device.

  1. Unplug the Oil Diffuser. Unplug the Oil Diffuser. Unplug the Oil Diffuser.
    • Unplug the Oil Diffuser.

  2. Using a Phillips #00 screwdriver from the iFixit kit, remove all three 10.0 mm screws on the bottom piece. Using a Phillips #00 screwdriver from the iFixit kit, remove all three 10.0 mm screws on the bottom piece.
    • Using a Phillips #00 screwdriver from the iFixit kit, remove all three 10.0 mm screws on the bottom piece.

  3. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  4. Remove the bottom piece of the Oil Diffuser.
    • Remove the bottom piece of the Oil Diffuser.

    • Be careful not to lose the outside light and air buttons.

  5. Unplug the fan power cord. Unplug the fan power cord.
    • Unplug the fan power cord.

  6. Using the Phillips #00, remove two 10.0 mm screws holding the fan onto the base of the diffuser. Using the Phillips #00, remove two 10.0 mm screws holding the fan onto the base of the diffuser.
    • Using the Phillips #00, remove two 10.0 mm screws holding the fan onto the base of the diffuser.

  7. Remove and replace the fan.
    • Remove and replace the fan.

结论

To reassemble your device, follow these instructions in reverse order.

Lilian Kay

于2019年10月07日注册

133 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 29

总计 242