跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide shows how to replace an ineffective or broken speaker in a Turtle Beach PX22 headset. Soldering skills are needed for this job.

  1. Use your fingers to peel off ear cushion by pinching and pulling off the leather.
    • Use your fingers to peel off ear cushion by pinching and pulling off the leather.

  2. Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head). The housing will come loose. Take note of the position of the wires connected to the speaker.
    • Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head).

    • The housing will come loose. Take note of the position of the wires connected to the speaker.

  3. Desolder the colored wire and copper wires.
    • Desolder the colored wire and copper wires.

终点

5等其他人完成本指南。

James de Iturrondo

于2015年03月18日注册

694 信誉积分

创作了4篇指南

团队

UMass Dartmouth, Team 3-1, Duarte Spring 2015 UMass Dartmouth, Team 3-1, Duarte Spring 2015 的会员

UMASSD-DUARTE-S15S3G1

4 名成员

创作了4篇指南

Does the speaker driver separate from the surrounding plastic disk, so it can be replaced with a like-sized driver, or is the driver plus mounting plate assembly sold as a replacement part?

Michael Merrell - 回复

Where can a new speaker be purchased? It says that there are no parts required but in step 3 it says to have a new speaker. I can't find this online.

jn8ion - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 15

总计 3,152