修复你的物品 社区 商店

Turtle Beach Elite Pro Right Speaker Replacement

简介

This guide will assist users in replacing the right speaker with a new speaker. It will be useful for users whose right speaker is no longer producing any sound or is producing sound that is broken and scratchy.

你所需要的

  1. Turtle Beach Elite Pro Right Speaker Replacement, Ear Cushions: 步骤 1 中的图像 1，1

    • Firmly pinch ear cushion between thumb and forefinger.

    • Using the hand not holding the ear cushion, grasp the orange plate that is below the ear cushion.

    • If the black rubber lining on the orange plate is grasped, then the rubber lining on the ear piece may tear.

    编辑

  2. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 2 中的图像 1，2 Turtle Beach Elite Pro Right Speaker Replacement: 步骤 2 中的图像 2，2

    • Rotate ear cushion counter-clockwise about half an inch.

    • The ear cushion should audibly snap out of place.

    • After it has audibly snapped out of place, lift the ear cushion off of the device.

    • During reassembly, rotate the ear cushion clockwise.

    编辑

  3. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 3 中的图像 1，2 Turtle Beach Elite Pro Right Speaker Replacement: 步骤 3 中的图像 2，2

    • Using the new cushion, align the pegs located on both the orange plate and ear cushion.

    • Make sure that both the ear cushion and the orange plate have the same designation.

    • Once the pegs are aligned, push the new ear cushion in place.

    编辑

  5. Turtle Beach Elite Pro Right Speaker Replacement, Right Speaker: 步骤 4 中的图像 1，1

    • Remove the right ear cushion.

    • The right ear piece does not have any additional attachments.

    编辑

  6. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 5 中的图像 1，1

    • Using the Phillips #0 screwdriver, remove the 6.0 mm screws on the orange plate.

    编辑

  7. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 6 中的图像 1，2 Turtle Beach Elite Pro Right Speaker Replacement: 步骤 6 中的图像 2，2

    • Use the opening tool to separate the orange plate from the black base plate.

    • Focus on the wires that are connected to the speaker.

    编辑

  8. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 7 中的图像 1，1

    • Cut the two wires that are attached to the speaker.

    • Cut the wires as close to the speaker as possible. These wires will be used in the next step.

    编辑

  9. Turtle Beach Elite Pro Right Speaker Replacement: 步骤 8 中的图像 1，2 Turtle Beach Elite Pro Right Speaker Replacement: 步骤 8 中的图像 2，2

    • Replace the old speaker with the new speaker.

    • Using the soldering iron, solder the wires to the new speaker.

    • Make sure to solder the wires to their original locations on the speaker.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Alexis Uribe

于03/24/17注册

510 声望

创作了4篇指南

徽章: 14

+ 11更多徽章

团队

Baylor, Team S5-G1, Williams Spring 2017 Baylor, Team S5-G1, Williams Spring 2017 的会员

BU-WILLIAMS-S17S5G1

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 952