本指南有最近更改,您可查看未经巡查的最新版本。
你所需要的
-
-
Begin by flipping over the transmitter, and removing the padding from the underside of it. This will reveal the screws to take apart the device.
-
-
-
-
Once the screws are removed, desolder the two wires from the board, and then remove it, and the charging pins with it.
Really useful!! Thank you.
Do you know why the light on the transmiter is a solid green and i can t pair the headset with it?
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.