修复你的物品 社区 商店

Turtle Beach Elite 800 Audio Board Replacement

你所需要的

  1. Turtle Beach Elite 800 Audio Board Replacement, Ear Cushion: 步骤 1 中的图像 1，2 Turtle Beach Elite 800 Audio Board Replacement, Ear Cushion: 步骤 1 中的图像 2，2

    • To remove the ear cushions, press firmly down and rotate them clockwise, it should twist about 2mm and release, allowing you to pull it off.

    • When reassembling, be sure to line up the locking plates.

    编辑

  2. Turtle Beach Elite 800 Audio Board Replacement, Audio Board: 步骤 2 中的图像 1，2 Turtle Beach Elite 800 Audio Board Replacement, Audio Board: 步骤 2 中的图像 2，2

    • Remove the screws (9.47 mm Phillips head) from the blue plating on the headset to reveal the inside.

    编辑

  4. Turtle Beach Elite 800 Audio Board Replacement: 步骤 3 中的图像 1，2 Turtle Beach Elite 800 Audio Board Replacement: 步骤 3 中的图像 2，2

    • If you are working on the LEFT side ear, you will first have to detach the battery by gently unplugging the white plug on the top of the board.

    • Make sure when unplugging the battery to not pull the manilla colored part which is attached to the board, but the white plug instead.

    • If you are working on the RIGHT side ear, you will first have to remove the charging contacts (2 7.92 mm Phillips screws).

    编辑

  5. Turtle Beach Elite 800 Audio Board Replacement: 步骤 4 中的图像 1，3 Turtle Beach Elite 800 Audio Board Replacement: 步骤 4 中的图像 2，3 Turtle Beach Elite 800 Audio Board Replacement: 步骤 4 中的图像 3，3

    • Desolder the necessary wires. (Each side will be slightly different.)

    • Be careful when using a soldering iron. Refer to the desoldering guide for tips.

    • For the purpose of this guide we clipped the wires connected to the board.

    • Remove the 4 screws (7.71mm Phillips head) using the #0 screw bit, that are holding the board in place.

    • Finally, remove the audio board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 1,902