修复你的物品 社区 商店

Tritton Kunai Right Speaker Replacement

简介

How to replace the TRITTON Kunai's right speaker.

你所需要的

  1. Tritton Kunai Right Speaker Replacement, Right Speaker: 步骤 1 中的图像 1，2 Tritton Kunai Right Speaker Replacement, Right Speaker: 步骤 1 中的图像 2，2

    • Firmly grasp the black ear cushion with one hand and the white speaker frame with the other hand.

    • Forcibly pull the ear cushion and speaker frame in opposite directions, until the right ear cushion separates from the right ear frame.

    翻译

  2. Tritton Kunai Right Speaker Replacement: 步骤 2 中的图像 1，2 Tritton Kunai Right Speaker Replacement: 步骤 2 中的图像 2，2

    • Remove the two 9 mm screws indicated in red with a PH00 screwdriver.

    • Remove the two 7 mm screws indicated in orange with a PH00 screwdriver.

    • Separate the black horseshoe shaped frame from the right speaker frame.

    翻译

  3. Tritton Kunai Right Speaker Replacement: 步骤 3 中的图像 1，2 Tritton Kunai Right Speaker Replacement: 步骤 3 中的图像 2，2

    • Remove the two 7 mm screws indicated in red using a PH00 screwdriver.

    • Separate the black bracket and then the rail adjustment from the right speaker frame.

    翻译

  4. Tritton Kunai Right Speaker Replacement: 步骤 4 中的图像 1，2 Tritton Kunai Right Speaker Replacement: 步骤 4 中的图像 2，2

    • Remove the five 7 mm screws indicated in red using a PH00 screwdriver.

    • Separate the black speaker console from the right speaker frame.

    翻译

  6. Tritton Kunai Right Speaker Replacement: 步骤 5 中的图像 1，1

    • Disconnect the red and green wires from the 16 Ohm speaker.

    翻译

  7. Tritton Kunai Right Speaker Replacement: 步骤 6 中的图像 1，1

    • Squeeze the tip of the tweezers into the gap between the speaker and the speaker case.

    • Remove the glue holding the speaker in place by scraping the glue with the tip of the tweezers.

    翻译

  8. Tritton Kunai Right Speaker Replacement: 步骤 7 中的图像 1，2 Tritton Kunai Right Speaker Replacement: 步骤 7 中的图像 2，2

    • Remove the speaker from its circular shaped slot.

    翻译

    • Apply glue to the sides of your new 16 Ohm speaker.

    翻译

  10. Tritton Kunai Right Speaker Replacement: 步骤 9 中的图像 1，2 Tritton Kunai Right Speaker Replacement: 步骤 9 中的图像 2，2

    • Insert your new speaker into the circular shaped slot located on the speaker cover.

    翻译

  11. Tritton Kunai Right Speaker Replacement: 步骤 10 中的图像 1，1

    • Solder the wires you disconnected from the old speaker to the new speaker. The red wire is to be soldered to the far right terminal, while the green wire is to be soldered to the far left terminal.

    • Here is iFixit's soldering guide.

    • Solder with caution and try not to burn yourself.

    翻译
结论

To reassemble your device, follow steps 1 through 4 in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

Elias El Tom

于03/12/15注册

338 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

UMass Dartmouth, Team 3-3, Duarte Spring 2015 UMass Dartmouth, Team 3-3, Duarte Spring 2015 的会员

UMASSD-DUARTE-S15S3G3

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,103