修复你的物品 社区 商店

Tribit XSound Go TS-BTS20 Speaker Replacement

简介

Is your Tribit Xsound Go speaker sounding grainy or low? The water, dirt, or even rust may cause a replacement for the speaker driver for a much clear and transparent sound. The following steps are easy to follow.

你所需要的

  1. Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: 步骤 1 中的图像 1，2 Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: 步骤 1 中的图像 2，2

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    编辑

  3. Tribit XSound Go TS-BTS20 Speaker Replacement: 步骤 2 中的图像 1，2 Tribit XSound Go TS-BTS20 Speaker Replacement: 步骤 2 中的图像 2，2

    • Remove the 14 Phillips screws around the perimeter of the speaker.

    编辑

  4. Tribit XSound Go TS-BTS20 Speaker Replacement: 步骤 3 中的图像 1，3 Tribit XSound Go TS-BTS20 Speaker Replacement: 步骤 3 中的图像 2，3 Tribit XSound Go TS-BTS20 Speaker Replacement: 步骤 3 中的图像 3，3

    • Disconnect both wires connected to speakers and motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 37

总计 146