修复你的物品 社区 商店

Tribit XSound Go TS-BTS20 Passive Radiator Replacement

简介

The Tribit XSound Go bluetooth speaker delivers rich, clear, room-filling sound like you've never heard before. Amazing full-range drivers, passive radiators create an auditory experience that's a delight for the senses.

你所需要的

  1. Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 步骤 1 中的图像 1，2 Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 步骤 1 中的图像 2，2

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    编辑

  2. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: 步骤 2 中的图像 1，1

    • Unscrew all the screws with the Phillips screwdriver, on the opened panel.

    • Lift off the speaker housing.

    编辑

  4. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: 步骤 3 中的图像 1，2 Tribit XSound Go TS-BTS20 Passive Radiator Replacement: 步骤 3 中的图像 2，2

    • Hold the frame which has the passive radiator in the middle.

    编辑

  5. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: 步骤 4 中的图像 1，1

    • Use a spudger to push the damaged passive radiator off the frame

    编辑

  6. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: 步骤 5 中的图像 1，1

    • Insert the new passive radiator into the frame.

    • The passive bass radiators seal out water from inside the device. Removing them multiple times may compromise the waterproof nature of the speaker.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 8

总计 36