简介

Whether your chain is too big or broken, this guide will help you get your bike back on the trail.

配件

无需配件。

  1. Begin loosening the tire by turning the quick release handle.
    • Begin loosening the tire by turning the quick release handle.

    添加评论

  2. Gripping the rear derailleur, pull the arm back, away from the front of the bike.
    • Gripping the rear derailleur, pull the arm back, away from the front of the bike.

    • Notice how the derailleur becomes almost vertical in the second picture when compared to the first.

    添加评论

    • There should be enough slack, in the chain, at this point to remove the tire from the bike.

    • Note: You may need to wiggle the tire and chain around in order to create enough slack.

    • Remove the tire from the bike.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Locate the master link along the chain.

    • Note: If the master link matches the one pictured in this step continue with the instructions, if not skip to the next step.

    • With pliers squeeze the two pins together so that the chain comes apart.

    添加评论

    • Note: This step is only for chains with a master link clip.

    • With a plier press the two pins together and remove the clip.

    • Once the clip is removed the chain should easily come apart.

    添加评论

    • Once the chain is separated, remove it from the bike by pulling one end.

    添加评论

    • With the new chain, place it on the current gear that your bike is in.

    • Note: If you don't know which gear your bike is in place the chain on one of the middle gears.

    • Thread one end of the chain through the derailleur from top to bottom so it is in the shape of a 'S'.

    • Next place the chain on the back gears, making sure that it is threaded through the guide.

    添加评论

    • To reassemble the chain bring both ends of the chain together so that the pins on each one lineup.

    • Grip the chain on both sides of the master link and pull.

    添加评论

    • If your chain does have a master link clip replace the link around the two pins.

    • Use a plier to slide the clip back into place.

    添加评论

结论

Once your chain is back together, you are ready to once again, hit the trails.

Jacob Rickman

于2014年01月26日注册

132 信誉积分

撰写一个指南

团队

Cal Poly, Team 1-37, Maness Winter 2014 Cal Poly, Team 1-37, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G37

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 370