跳转到主内容
危险
有潜在危险
如果不正确地执行这个步骤,就可能导致受伤。请保持谨慎并注意所有警告。
危险

简介

If you need to swap out your brake cable, this will help you replace it safely.

配件

没有特定配件。

  1. Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable. Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable.
    • Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable.

  2. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable.
    • Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Unscrew the cap next to the brake handle and remove it from the cable. Unscrew the cap next to the brake handle and remove it from the cable.
    • Unscrew the cap next to the brake handle and remove it from the cable.

  5. Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable). Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable). Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable).
    • Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable).

  6. Unscrew the bracket located on the front tire with a 3mm allen wrench. Rotate the bracket 90 degrees or until the opening is large enough for the cable. Remove the cable. Note that if removing cable for rear brake, rather than unscrewing a bracket, you will unclip several "spring" clips. Keep track of clips.
    • Unscrew the bracket located on the front tire with a 3mm allen wrench.

    • Rotate the bracket 90 degrees or until the opening is large enough for the cable. Remove the cable.

    • Note that if removing cable for rear brake, rather than unscrewing a bracket, you will unclip several "spring" clips. Keep track of clips.

结论

To place the new cable, follow these instructions in reverse order.

Ben Hartinger

于2014年01月27日注册

340 信誉积分

创作了3篇指南

团队

Cal Poly, Team 1-37, Maness Winter 2014 Cal Poly, Team 1-37, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G37

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 263