跳转到主内容

Trek 820 Light Mount Replacement

你所需要的

  1. Trek 820 Light Mount Replacement, Light Mount: 步骤 1 中的图像 1,2 Trek 820 Light Mount Replacement, Light Mount: 步骤 1 中的图像 2,2
    • Clean the area where the light mount will be installed with a soft cloth.

    • Placing the light mount close to the center stem.

  2. Trek 820 Light Mount Replacement: 步骤 2 中的图像 1,1
    • Remove the strap from the light mount fitting.

    • Stretch the strap clockwise around the handlebars.

  3. Trek 820 Light Mount Replacement: 步骤 3 中的图像 1,1
    • Slide the strap through the slot and fasten to a snug, but moveable fit.

    • Do not fasten too tight as this will make it difficult to fine tune light mount placement.

  4. Trek 820 Light Mount Replacement: 步骤 4 中的图像 1,1
    • Pull the strap tightly through the clasps at the bottom of the mount.

  5. Trek 820 Light Mount Replacement: 步骤 5 中的图像 1,2 Trek 820 Light Mount Replacement: 步骤 5 中的图像 2,2
    • Place the fastening screw in the rear screw port on the light mount.

    • Twist the screw clockwise using your hands until fully fastened.

结论

Now you have a light mount ready for safer night rides on your Trek bicycle!

团队

Cal Poly, Team 1-1, Propen Fall 2012 Cal Poly, Team 1-1, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G1

5 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 842