修复你的物品 社区 商店

TotalPond Pond Pump Impeller Rubber Stop Replacement

简介

The rubber stop at the back end of the impeller spindle serves the purpose of ensuring that the impeller stays on the spindle. This guide states the steps to be followed when replacing the rubber stop.

  1. TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: 步骤 1 中的图像 1，3 TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: 步骤 1 中的图像 2，3 TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: 步骤 1 中的图像 3，3

    • Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.

    编辑

  3. TotalPond Pond Pump Impeller Rubber Stop Replacement: 步骤 2 中的图像 1，3 TotalPond Pond Pump Impeller Rubber Stop Replacement: 步骤 2 中的图像 2，3 TotalPond Pond Pump Impeller Rubber Stop Replacement: 步骤 2 中的图像 3，3

    • Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.

    编辑

  4. TotalPond Pond Pump Impeller Rubber Stop Replacement: 步骤 3 中的图像 1，2 TotalPond Pond Pump Impeller Rubber Stop Replacement: 步骤 3 中的图像 2，2

    • Remove the rubber stop that is attached to the tube that runs through the middle of the impeller.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Nicole Santana

于01/13/15注册

597 声望

创作了5篇指南

徽章: 12

+ 9更多徽章

团队

USF Tampa, Team 3-6, Hickman Winter 2015 USF Tampa, Team 3-6, Hickman Winter 2015 的会员

USFT-HICKMAN-W15S3G6

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 618