简介

The bulb of a projector is only rated for a certain amount of hours, so when it reaches the end of its life the image will become fuzzy and eventually die out. This guide will show how to replace the bulb on this projector.

  1. Remove the two screws from the bottom plate as shown.
    • Remove the two screws from the bottom plate as shown.

    添加评论

  2. Remove the two screws on the bulb housing.
    • Remove the two screws on the bulb housing.

    添加评论

    • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

    • Replace the bulb with an equivalent one.

    OMG, is that entire thing the bulb? Or does the bulb get inserted into this piece? It says “replace” as if it it were merely a matter of pushing it in, but I see screws…

    lkmemphis - 回复

结论

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

于2018年04月02日注册

697 信誉积分

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 52