配件

无需配件。

  1. Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.
    • Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

  2. Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners. Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.
    • Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

  3. Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop. Carefully pull the top away from the back. Carefully pull the top away from the back.
    • Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.

    • Carefully pull the top away from the back.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Turn the laptop around. Remove the webcam/microphone data cable. Remove the webcam/microphone data cable.
    • Turn the laptop around.

    • Remove the webcam/microphone data cable.

  6. Remove the lower lighting power supply. Remove the signal light power supply and data cable.
    • Remove the lower lighting power supply.

    • Remove the signal light power supply and data cable.

  7. Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display. After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.
    • Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.

    • After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

  8. Carefully remove the screen from the side brackets. Remove the LCD ribbon connector from the display.
    • Carefully remove the screen from the side brackets.

    • Remove the LCD ribbon connector from the display.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Brandon Kirklen

于2013年01月11日注册

269 信誉积分

创作了8篇指南

团队

Cal Poly, Team 7-8, Maness Winter 2013 Cal Poly, Team 7-8, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G8

4 名成员

创作了8篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 557