跳转到主内容

简介

The RAM card is the part of the computer that has memory and stores the data being used by the computer. It keeps the computer's functions regulating smoothly. Below are a few steps to take in order to remove and replace the computer's RAM Cards.

  1. Push the locking tabs away from each other. Push the locking tabs away from each other.
    • Push the locking tabs away from each other.

  2. Pull up on the battery to remove. Pull up on the battery to remove.
    • Pull up on the battery to remove.

  3. Remove the 3mm Phillips #0 screw from the cover. Remove the 3mm Phillips #0 screw from the cover.
    • Remove the 3mm Phillips #0 screw from the cover.

  4. Use a plastic opening tool to lift up the cover and remove by hand. Use a plastic opening tool to lift up the cover and remove by hand. Use a plastic opening tool to lift up the cover and remove by hand.
    • Use a plastic opening tool to lift up the cover and remove by hand.

  5. Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.
 When released, the RAM module will pop up at a slight angle. 
Lift the RAM module to an angle of about 30 degrees and slide it out.
    • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


    • When released, the RAM module will pop up at a slight angle.

    • 
Lift the RAM module to an angle of about 30 degrees and slide it out.

结论

To reassemble your device, follow these instructions in reverse order.

Benson Smith

于2018年01月25日注册

327 信誉积分

创作了3篇指南

团队

USF Tampa, Team S20-G3, Passmore Spring 2018 USF Tampa, Team S20-G3, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S20G3

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 5

总计 110