跳转到主内容

简介

The laptop screen, most of which are made of glass, is the physical surface on which visual information is presented. Sometimes screens can become faulty or can become damaged from an accident. Luckily, laptop screens are replaceable and below are the instructions to do it on your own.

  1. Remove the two F3 screws on the bottom part of the screen. Remove the two F3 screws on the bottom part of the screen.
    • Remove the two F3 screws on the bottom part of the screen.

  2. Using  a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off. Using  a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.
    • Using a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  4. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.
    • Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.

  5. Using the Phillips 012, remove the three F2 screws on each side of the screen. Using the Phillips 012, remove the three F2 screws on each side of the screen. Using the Phillips 012, remove the three F2 screws on each side of the screen.
    • Using the Phillips 012, remove the three F2 screws on each side of the screen.

  6. Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam. Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.
    • Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.

  7. Remove the tape holding the sliding connector and gently pull it out. Remove the tape holding the sliding connector and gently pull it out.
    • Remove the tape holding the sliding connector and gently pull it out.

结论

To reassemble your device, follow these instructions in reverse order.

Rodrigo

于2018年01月25日注册

133 信誉积分

撰写一个指南

团队

USF Tampa, Team S20-G3, Passmore Spring 2018 USF Tampa, Team S20-G3, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S20G3

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 97