简介

This guide will show you how to replace your keyboard.

Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool. Push back the screen until it is horizontal with the laptop. Gently remove the clips that hold the panel onto the screen hinges.
  • Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.

  • Push back the screen until it is horizontal with the laptop.

  • Gently remove the clips that hold the panel onto the screen hinges.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver. Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool. Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.
  • Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.

  • Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool.

  • Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.

  • CAUTION!! Make sure you remove the keyboard slowly to avoid damaging the ribbon cable.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Aryn Pauly

于2010年04月29日注册

1 信誉积分

创作了2篇指南

团队

Cal Poly, Team 10-42, Garner Spring 2010 Cal Poly, Team 10-42, Garner Spring 2010 的会员

CPSU-GARNER-S10S10G42

5 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 5

总计 8,056