简介

This guide will help you replace your CD drive if you've determined that it is no longer working.

  1. Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop. Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.
    • Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.

  2. Remove the panel, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the panel, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Unscrew the 3.9 mm screw located at the bottom right of the panel.
    • Unscrew the 3.9 mm screw located at the bottom right of the panel.

  5. Use a plastic opening tool to pry the CD drive out of the casing.
    • Use a plastic opening tool to pry the CD drive out of the casing.

  6. Once the CD drive is out far enough to grip, pull the CD drive out to the right.
    • Once the CD drive is out far enough to grip, pull the CD drive out to the right.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Torey

于2013年01月31日注册

196 信誉积分

撰写一个指南

团队

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G7

5 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 16

总计 1,646