简介

This guide will assist you in removing the display of your device. You'll need to be extra careful when removing the glass screen from your device.

  1. Make sure you turn the laptop off first.
    • Make sure you turn the laptop off first.

    • Close the laptop lid and flip it over so that Toshiba logo is facing down.

    添加评论

  2. Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.
    • Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

    添加评论

    • Once the screws are removed, slide the battery pack out of the computer.

    添加评论

    • Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.

    • Use the plastic opening tool to remove the back cover from the laptop.

    • Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

    添加评论

    • Unscrew the four 6mm screws from each of the laptop hinges using a Philips head #00 screwdriver.

    添加评论

    • Disconnect connect the ribbon marked in red.

    • Disconnect all ribbons and cables marked in orange.

    添加评论

    • Flip your laptop back to the front.

    • Lift up the screen cover.

    添加评论

    • Gently pull the screen to disconnect the monitor from the hinges.

    添加评论

    • Use the plastic opening tool to pry the plastic covering off of the monitor.

    • Be careful not to break the glass, as this can cause injury.

    添加评论

    • Remove the four 3mm Phillips head screws with a Phillips #00 screwdriver.

    • Gently remove the screen from the device.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Carson Longendorfer

于2018年03月26日注册

205 信誉积分

创作了2篇指南

团队

UMass Dartmouth, Team S3-G3, Peak Spring 2018 UMass Dartmouth, Team S3-G3, Peak Spring 2018 的会员

UMASSD-PEAK-S18S3G3

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 35

总计 282