配件

无需配件。

  1. Locate the two sliding battery locks on the underside of the laptop.
    • Locate the two sliding battery locks on the underside of the laptop.

    添加评论

  2. Locate the right battery lock and slide it to the right.
    • Locate the right battery lock and slide it to the right.

    添加评论

    • While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the battery from the laptop.

    添加评论

    • Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.

    添加评论

    • Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.

    添加评论

    • Remove the RAM module by pulling it out at the angle it was rotated to.

    添加评论

    • If you want to replace the second RAM module, apply steps 2 and 3 to do so.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order. When placing the RAM chips in, push them down until the levers snap into place after inserting them into the slot.

Ricky Baker

于2014年03月26日注册

217 信誉积分

创作了2篇指南

团队

Clemson, Team 1-2, Benson Spring 2014 Clemson, Team 1-2, Benson Spring 2014 的会员

CLEM-BENSON-S14S1G2

3 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 320